LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 1995 >> G20 Automatic, 1RL4F03A >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments 2.0L >> Adjustment >> Throttle Position (TP) Sensor
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Throttle Position (TP) Sensor

  1. Turn ignition on. Backprobe wiring harness side of TP sensor connector and measure sensor output voltage. See Fig 1 . Voltage should be 0.4-0.6 volt with throttle fully closed.
  2. If voltage is not correct, slightly loosen TP sensor mounting bolts. Rotate sensor body until voltage reads 0.4-0.6 volt. Tighten mounting bolts, and recheck voltage reading.
Fig 1: Measuring Throttle Position (TP) Sensor Voltage (G20)
G95A30973Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals