LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 1994 >> J30 >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Emission Systems & Sub-Systems >> PAIRC-Solenoid Valve
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

PAIRC-Solenoid Valve

  1. Remove vacuum lines and electrical connector from solenoid. Remove solenoid from vehicle. Apply battery voltage to White/Green wire terminal of solenoid. Apply ground to Gray wire terminal of solenoid. Blow into vacuum port "B" on end of solenoid.
  2. As battery voltage is applied, air should pass out of vacuum port "A". With power and ground removed from solenoid, air should pass out of port "C". Port "C" may be covered by a filter. See Figure .
scientia non olet · About LEMON Manuals