September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Removal And Installation
- Disconnect the battery (-) terminal.
- Disconnect the SBW control unit (SCU) connector (A).
 Courtesy of HYUNDAI MOTOR AMERICA
|
- Remove the SBW control unit (A) after removing the bolts.
Tightening torque:
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)
 Courtesy of HYUNDAI MOTOR AMERICA
|
- Install in the reverse order of removal.