(SRS Control Module (SRSCM) Removal And Installation)
ABBREVIATED PROCEDURE
| Work | H/W | Tightening torque N.m (kgf.m/lb-ft) | SST/Equipment | Chemical | etc | |
|---|---|---|---|---|---|---|
|
||||||
| 1 | Disconnect the battery (-) terminal | - | - | - | - | - |
| 2 | Remove the floor console air duct (Refer to Body (Interior/Exterior/Electrical) - "FLOOR CONSOLE MOUNTING BRACKET ") |
- | - | - | - | - |
| 3 | Disconnect the SRSCM connector | - | - | - | - | - |
| 4 | Remove the SRSCM | Nut | 7.8 - 9.8 (0.8 - 1.0/5.8 - 7.2) | - | - | - |
|
||||||
| Install in the reverse order of removal | - | |||||
|
||||||
|
||||||