LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2023 >> Santa Fe Plug-In Hybrid SEL Convenience >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (PHEV) >> Mass Air Flow Sensor (MAFS) >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery (-) cable.
  2. Disconnect the mass air flow sensor connector (A) and the installation clamp (B).
  3. Disconnect the air intake hose (C).
    G16146347Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the mass air flow sensor (A) after loosening mounting bolt.

    Tightening Torque: 

    5 - 7 N.m (0.5 - 0.7 kgf.m, 3.6 - 5.1 lb.ft)

G16146348Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals