Motor Driven Power Steering System DTCS
MOTOR DRIVEN POWER STEERING SYSTEM DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| C1101-01 | Battery Voltage High |
| C1102-01 | Battery Voltage Low |
| C1109-10 | Ignition Signal Error |
| C1112-01 | Torque Sensor Supply Voltage Error |
| C1259-11 | Steering Angle Sensor - Electrical Malfunction |
| C1261-54 | Steering Angle Sensor Not Calibrated |
| C1262-54 | Temperature Sensor Failure |
| C1290-22 | Torque Sensor Signal Fail |
| C1603-4B | Over Heat Protection |
| C1604-52 | ECU Hardware Error |
| C1616-88 | CAN Bus Off |
| C1622-85 | Vehicle Speed Signal Error |
| C1628-87 | CAN Timeout - Cluster |
| C1633-86 | Cluster Invalid Displayed Speed |
| C1692-87 | CAN Time - out VSM |
| C1693-86 | CAN Signal Error VSM |
| C1700-00 | Byte Coding Error |
| C1702-00 | Variant Coding Error |
| C1704-72 | ECU Fail - Safe Relay Fail |
| C1705-16 | EPS Module (pre-charge circuit) Malfunction |
| C1711-01 | Improper Program Termination |
| C1802-87 | CAN Time-Out VCU |
| C1804-87 | CAN Time Out LKAS |
| C1805-86 | CAN Signal Error LKAS |
| C1806-87 | CAN Time-Out MCU |
| C1812-87 | CAN Time-Out Gateway |
| C2401-29 | Motor Circuit |
| C2401-62 | Motor Circuit |
| C2412-96 | Motor Short or Open |
| C2413-22 | Motor current fail |