Ground Circuit Inspection
| Check Item | Specifications | Prerequisite Condition | Terminal (+) | Terminal (-) |
|---|---|---|---|---|
| Ground Circuit - Resistance | Approx. 0Ω |
|
GND terminal of IATS (MAPS) harness | Chassis GND |
- Is the measured resistance within specification?
YES
- Go to next step below.
NO
- Repair open circuit and go to "Verification Of Repair " procedure
| Check Item | Specifications | Prerequisite Condition | Terminal (+) | Terminal (-) |
|---|---|---|---|---|
| Signal Circuit - Voltage | Approx. 5V |
|
Signal terminal of IATS (MAPS) harness | Chassis GND |
- Is voltage within the specification?
YES
- Go to next step below.
NO
- Check for open or short to battery in signal harness. Repair as necessary and go to "Verification Of Repair " procedure.