September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Repair Procedures: Removal
- Turn ignition switch OFF and disconnect the negative (-) battery cable.
- Remove the engine cover.
- Disconnect the ignition coil connector (A).
Courtesy of HYUNDAI MOTOR AMERICA
|
NOTE:
- When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
Courtesy of HYUNDAI MOTOR AMERICA
|
- Remove the ignition coil (A) after loosening the mounting bolts.
Courtesy of HYUNDAI MOTOR AMERICA
|