September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Repair Procedures: Removal
WARNING: This page is about a different variant/trim than selected.
- Turn the ignition switch OFF and disconnect the battery negative (-) cable.
- Disconnect the CVVT oil control valve connector (A).
- Remove the installation bolt (B), and then remove the valve from the engine.
[Bank 1/Intake #1]
 Courtesy of HYUNDAI MOTOR AMERICA
|
[Bank 1/Intake #2]
 Courtesy of HYUNDAI MOTOR AMERICA
|
 Courtesy of HYUNDAI MOTOR AMERICA
|
[Bank 1/Exhaust]
 Courtesy of HYUNDAI MOTOR AMERICA
|