LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2019 >> Accent SE, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System/Electronic Stability Control System Diagnosis >> DTC C1201-02: Wheel Speed Sensor Front-LH Range/Performance/Intermittent >> DTC Inspection >> Monitor GDS Data
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Monitor GDS Data

  1. Turn the ignition switch "ON".
  2. Connect GDS to Data Link Connector (DLC).
  3. Start and drive vehicle in gear and maintain vehicle speed at or above 40km/h. (24mph)
  4. Monitor the "WHEEL SPEED SENSOR" parameter on the "Current Data" menu of the GDS.

    Specification  :

    Compare the result with other parameters of wheel speed sensor. If it is the same as other parameters, it is in normal condition.

  5. Is the result within specifications?

    YES 

    • Fault can be intermittent, caused by either faulty ESP (ESC), wheel speed sensor, or interference between harnesses. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair " procedure.

    NO 

    • Go to next step.
scientia non olet · About LEMON Manuals