LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2018 >> Santa Fe Sport Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System >> Cruise Control Switch >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver airbag module.

    (Refer to Restraint - "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ")

  3. Remove the steering wheel.

    (Refer to STEERING WHEEL Steering System)

  4. Remove the steering wheel cover (A) after loosening the screws.
    Fig 1: Removing Steering Wheel Cover Screws (1 Of 2)
    G12053738Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Removing Steering Wheel Cover Screws (2 Of 2)
    G12053739Courtesy of HYUNDAI MOTOR AMERICA
  5. Loosen the screws after disconnecting the steering wheel remote control switch connector (A).
    Fig 3: Disconnecting Steering Wheel Remote Control Switch Connector
    G12053740Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the remote control switches (A).
    Fig 4: Removing Remote Control Switches
    G12053741Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals