LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2018 >> Santa Fe SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Body Control Module (BCM) Diagnosis) >> DTC B1609-00: CAN Time-Out SJB, FSJB >> Verification Of Repair >> Verification Of Vehicle Repair
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Verification Of Vehicle Repair

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe XL and 2017 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scantool and select "DTC Analysis" mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is any DTC displayed again?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • System performing to specification at this time.
scientia non olet · About LEMON Manuals