LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2018 >> Elantra Value Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 195 (Body Control Module (BCM) Diagnosis) >> DTC B163E-00: Rain Sensor Module LIN Fault >> Verification Of Repair >> Verification of Vehicle Repair
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Verification of Vehicle Repair

WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and select "Diagnostic Trouble Codes (DTC)" mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is any DTC output again?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • System performing to specification at this time.
scientia non olet · About LEMON Manuals