LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2018 >> Elantra SE, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (Power Windows) >> Power Window Switch >> Repair Procedures >> Inspection >> Rear Power Window Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Rear Power Window Switch

WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear door trim.

    (Refer to Body - "REAR DOOR TRIM ")

  3. Disconnect the power mirror switch connector from the door trim.
    Fig 1: Rear Power Window Switch Connector Terminals
    G12023620Courtesy of HYUNDAI MOTOR AMERICA
  4. Check for continuity between the terminals in each switch position as displayed below.

    [Rear Power Window Switch Inspection] 

    Fig 2: Rear Power Window Switch Terminals Continuity Chart
    G12023621Courtesy of HYUNDAI MOTOR AMERICA

    [Rear Sear Heater Switch Inspection] 

    Fig 3: Rear Sear Heater Switch Terminals Continuity Chart
    G12023622Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals