LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Yaw-Rate And Lateral G Sensor >> Repair Procedures >> Removal >> Longitudinal G Sensor Calibration
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Longitudinal G Sensor Calibration

  1. IG ON, ENG OFF
  2. Stand the vehicle on a flat ground without any inclination.
  3. Set the steering wheel at the center position.
  4. Keep the vehicle under normal tire pressure condition and normal loading condition.
  5. Connect GDS to Data Link Connector (DLC).
  6. Perform Longitudinal G Sensor Calibration. (Fig 1).
    Fig 1: Screen Display - Longitudinal G Sensor Calibration
    G12125693Courtesy of HYUNDAI MOTOR AMERICA
  7. Confirm success or failure of calibration.
scientia non olet · About LEMON Manuals