LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Tucson Value, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind Spot Detection System >> Blind Spot Detection Unit >> Repair Procedures >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Installation

  1. Install the BSD unit and bracket.

    Tightening torque: 

    BCW bracket: 3.9 - 5.9 N.m (0.4 - 0.6 kg cm, 2.9 - 4.4 lb-ft)

    BCW unit: 2.5 N.m

  2. Install the rear bumper.
  3. Connect the negative (-) battery terminal.
NOTE:
  • Take care not to confuse left side (master) and right side (slave) unit when installing.
  • BSD units connector connect to the wiring connector.
scientia non olet · About LEMON Manuals