Repair Procedures: Removal
- Remove the front wheel and tire (A) from front hub.
Tightening torque:
107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft)
NOTE:- Be careful not to damage to the hub bolts when removing the front wheel and tire (A).
- Loosen the bolt & nut and then remove the lower arm (A).
Tightening torque:
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)
- Remove the front lower arm (C) and than loosen the bolts (A, B) & nuts.
Tightening torque:
- 117.7 ~ 137.3N.m (12.0 ~ 14.0kgf.m, 86.8 ~ 101.3lb-ft)
- 156.9 ~ 176.5N.m (16.0 ~ 18.0kgf.m, 115.7 ~ 130.2lb-ft)
- Installation is the reverse of removal.
- Check the front alignment.
(Refer to "FRONT ALIGNMENT ")