LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Elantra GT Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle Control System) >> Repair Procedures >> Adjustment >> TCM learning procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

TCM learning procedure

WARNING: This page is about a different variant/trim than selected.
  1. Automatic Transaxle Fluid (ATF) temperature: 40~100°C (104~212°F)
  2. Static learning

    Repeat the below shift pattern four times or more with stepping on the brake.

    Fig 1: Shift Lever Timing Pattern
    G12066639Courtesy of HYUNDAI MOTOR AMERICA
  3. Driving learning

    Drive the vehicle from a stop in D through all gears 1st, 2nd, 3rd, 4th, 5th and 6th gear while holding the throttle steady at the specified Throttle Position Sensor (TPS) value (15~25%).

scientia non olet · About LEMON Manuals