LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Accent Value Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Supplemental Restraint System Control Module (SRSCM) And Sensors) >> Passive Occupant Detection System (PODS-F) >> Repair Procedures >> Installation >> PODS-F Mat
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

PODS-F Mat

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the PODS-F Mat equipped seat cushion assembly on the front seat assembly.

    (Refer to Body - "FRONT SEAT ")

  2. Connect the PODS-F mat connector.
  3. Install the front passenger seat assembly.

    (Refer to Body - "FRONT SEAT ")

  4. Reconnect the battery negative cable.
  5. After installing the PODS-F, confirm proper system operation:
    • Turn the ignition switch ON the SRS indicator should be turned on for about six seconds and then go off.
    • Telltale lamp will turn on for 4 seconds and be turned off for 3 seconds. After the 7 seconds, it shall remain off if the PODS-F does not require suppression and the passenger airbag is enabled.
    NOTE: Be sure to perform PODS-F zeroing with GDS after replacing PODS-F equipped seat cushion.
scientia non olet · About LEMON Manuals