LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Accent Value Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Immobilizer System) >> Immobilizer Control Unit >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver crash pad lower panel.

    (Refer to Body - " CRASH PAD LOWER PANEL  ") 

  3. Remove the knee airbag module.

    (Refer to Restraint - " KNEE AIRBAG (KAB) MODULE  ") 

  4. Disconnect the connector of the immobilizer unit and then remove the immobilizer bolt (A) after loosening a nut.
Fig 1: Locating Immobilizer Bolt
G12055002Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals