Repair Procedures: Removal
WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch OFF.
- Disconnect the battery sensor connector (A) and battery negative (-) terminal.
Battery Negative (-) Terminal Tightening Nut:
4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)
- Disconnect the battery.
(Refer to Engine Electrical System - "BATTERY ")
- Remove the battery sensor & battery negative (-) cable assembly after loosening the sensor cable mounting bolt (A).
Battery Sensor & Battery Negative (-) Cable Assembly Mounting Bolt (Chassis Ground):
21.6 ~ 32.4 N.m (2.2 ~ 3.3 kgf.m, 16.0 ~ 23.9 lb-ft)