Floor Console Replacement: A/T

NOTE:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.

Remove the gear knob (A).

Courtesy of HYUNDAI MOTOR AMERICA
Using a screwdriver or remover, remove the console upper cover (A).

Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connector (A).

Courtesy of HYUNDAI MOTOR AMERICA
Remove the console tray mat (A).

Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting bolt and clips, then remove the floor rear console (A).

Courtesy of HYUNDAI MOTOR AMERICA
Using a screwdriver or remover, remove the floor console front bezel (A).

Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connectors (A).

Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting bolts and nut, clips, then remove the floor front console (A).

Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
NOTE:
- Make sure the connector are connected in properly.
- Replace any damage clips.