LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Veloster Turbo, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L T-GDI >> RCV Control Solenoid Valve >> Repair Procedures >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Repair Procedures: Removal

  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Remove the Air Duck (A).
    Fig 1: Air Duck Location
    G10604618Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the cooling pan control connector (A) and cooling pan & RCV extension connector (B) from the bracket.
    Fig 2: Cooling Pan Control Connector And Cooling Pan & RCV Extension Connector
    G10604619Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the RCV control solenoid valve connector (A) and vapor hoses (B).
  5. Remove the installation bolts (C) and then RCV control solenoid valve (D).
Fig 3: Recirculation Valve Control Solenoid Valve, Connector, Vapor Hoses And Installation Bolts
G10604620Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals