LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Veloster Turbo, Automatic DCT Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Dual Clutch Transmission Control System - 1.6L T-GDI >> Input Shaft Speed Sensor 1 >> Repair Procedures >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Installation

  1. Install in the reverse order of removal.
    NOTE:
    • Before installing the Input Speed Sensor, check the assembled state of the O-Rings (A) and should apply Gear Oil to the surface of O-Rings.
      Fig 1: Checking Input Speed Sensor O-Rings
      G10607334Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals