LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Santa Fe XL Base >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control Switch >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver airbag module.

    (Refer to "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ")

  3. Remove the steering wheel.

    (Refer to "STEERING COLUMN AND SHAFT ")

  4. Remove the steering wheel cover (A) after loosening the screws.
    Fig 1: Steering Wheel Cover And Screws (1 Of 2)
    G10574767Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Steering Wheel Cover And Screws (2 Of 2)
    G10574768Courtesy of HYUNDAI MOTOR AMERICA
  5. Loosen the screws after disconnecting the steering wheel remote control switch connector (A).
    Fig 3: Steering Wheel Remote Control Switch Connectors
    G10574769Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the remote control switches (A).
    Fig 4: Remote Control Switches
    G10574770Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals