LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Santa Fe Sport 2.0T, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Inspection >> Throttle Position Sensor (TPS)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Throttle Position Sensor (TPS)

  1. Connect the GDS on the Data Link Connector (DLC).
  2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T.

    Specification  : Refer to "SPECIFICATION "

  3. Turn the ignition switch OFF and disconnect the scan tool from the DLC.
  4. Disconnect the ETC module connector and measure the resistance between the ETC module terminals 1 and 2.

    Specification  : Refer to "Sensor Resistance"