LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Genesis Coupe 3.8 Ultimate, Automatic Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System >> Pressure Switch >> Repair procedures >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair procedures: Inspection

  1. Turn ignition switch OFF.
  2. Disconnect the E Module connector.
  3. Measure resistance between switch signal terminal and switch ground terminal.
  4. Check that the resistance is within the specification.
scientia non olet · About LEMON Manuals