LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Elantra Value Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Engine Control System) >> CVVT Oil Control Valve (OCV) >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the CVVT oil control valve connector (A).
  3. Remove the installation bolt (B), and then remove the valve from the Engine.

    [Bank 1/Intake] 

    Fig 1: Identifying CVVT Oil Control Valve Connector (Bank 1/Intake)
    G10749937Courtesy of HYUNDAI MOTOR AMERICA

    [Bank 1/Exhaust] 

    Fig 2: Identifying CVVT Oil Control Valve Connector (Bank 1/Exhaust)
    G10749938Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals