LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Elantra Sport, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Engine Control System) >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the installation bolt.
Fig 1: Identifying Crankshaft Position Sensor Connector
G10749870Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Identifying Crankshaft Position Sensor Bolt
G10749871Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals