LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Elantra SE, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control System Diagnosis >> DTC C2112: Valve Relay Error >> Scantool Diagnostics >> Monitor GDS Data
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Monitor GDS Data

  1. Connect GDS to Data Link Connector (DLC).
  2. IG "ON".
  3. Select the "Actuation Test"  mode on the GDS.
  4. Inspect operating status of all valves with Actuation Test.

    Specification:  It's normal if operating sound is heard

  5. Do all valves operate normally?

    YES 

    • Fault is intermittent caused by poor connection in power harness and/or HECU's connector or was repaired and HECU memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

scientia non olet · About LEMON Manuals