Adjusting Method for T/M Control Cable
WARNING: This page is about a different variant/trim than selected.
- Set Room Side Shift Lever and T/M side manual control lever to "N" position.
- Connect room side shift lever and shift cable.
- Push cable to "F" direction, displayed, to eliminate FREE PLAY.
- Tighten adjusting nut (A).
Tightening Torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
- After adjusting according check to be sure that this part operates surely at each range of T/M side correspond.