LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2015 >> Genesis 5.0 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (AWD Control Diagnosis) >> DTC P3104: Control Module - Failure Current Measurement >> Verification of Vehicle Repair >> Verification of Vehicle Repairrea
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Verification of Vehicle Repairrea

WARNING: This page is about a different variant/trim than selected.

After a repair, it is essential to verifying that the fault has been corrected.

  1. Connect GDS and select "Diagnostic Trouble Codes (DTC)"  mode.
  2. Using GDS, Clear DTC.
  3. Check DTCs in other system after fixing the vehicle.

    (If there is the DTC representing "4WD CAN time out", Clear the DTC).

  4. Are any DTCs present?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • System is performing to specification at this time.
scientia non olet · About LEMON Manuals