Signal Circuit Inspection
- Connect the Inhibitor switch connector.
- Turn the ignition key ON and the engine OFF.
- Measure voltages between each terminal and chassis ground while the shift lever changes from P to R, N and D.
Specification : See below "SIGNAL CODE TABLE "
Signal Code Table
SIGNAL CODE TABLE
| P | P-R | R | R-N | N | N-D | D | |
|---|---|---|---|---|---|---|---|
| Signal "1" | 12V | 12V | 0 | 0 | 0 | 0 | 0 |
| Signal "2" | 0 | 12V | 12V | 12V | 0 | 0 | 0 |
| Signal "3" | 0 | 0 | 0 | 12V | 12V | 12V | 0 |
| Signal "4" | 0 | 0 | 0 | 0 | 0 | 12V | 12V |