LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2015 >> Elantra GT Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Automatic Transaxle Control System - A6GF1) >> Transaxle Control Module (TCM) >> Repair procedures >> Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair procedures: Replacement

WARNING: This page is about a different car, the 2016 Hyundai Elantra and 2015 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect the negative (-) battery cable.
  3. Disconnect the TCM connector (A).
    Fig 1: TCM Connectors
    G10538000Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the TCM (A) after removing the bolt and nut.

    TCM installation bolt/nut: 

    9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    Fig 2: TCM, Bolt And Nut
    G10538001Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals