Repair procedures: Removal
WARNING: This page is about a different car, the 2016 Hyundai Elantra and 2015 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the valve body assembly.
(Refer to "VALVE BODY ")
- Disconnect the input & output speed sensor connector (A) from the main wiring.
- Remove the input & output speed sensor (B) after removing the bolts (2ea).
Tightening torque:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)