Floor Console Replacement: [A/T]

NOTE:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.

Remove the gear knob (A).

Fig 1: Removing Gear Knob
Courtesy of HYUNDAI MOTOR AMERICA
Using a screwdriver or remover, remove the console upper cover (A).

Fig 2: Removing Console Upper Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connector (A).

Fig 3: Console Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the console tray mat (A).

Fig 4: Removing Console Tray Mat
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting bolt and clips, then remove the floor rear console (A).

Fig 5: Removing Floor Rear Console
Courtesy of HYUNDAI MOTOR AMERICA
Using a screwdriver or remover, remove the floor console front bezel (A).

Fig 6: Removing Floor Console Front Bezel
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connectors (A).

Fig 7: Console Connectors
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting bolts and nut, clips, then remove the floor front console (A).

Fig 8: Removing Floor Front Console
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
NOTE:
- Make sure the connector are connected in properly.
- Replace any damage clips.