LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Non-Turbo >> Camshaft Position Sensor (CMPS) >> Repair procedures >> Removal >> Bank 1/Intake
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Bank 1/Intake

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.
    Fig 1: Camshaft Position Sensor Connector & Bolt (Bank 1 / Intake)
    G08807037Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals