LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Genesis Coupe 3.8 Ultimate, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> Fuel Pump Resister >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the fuel pump resister connector.
  3. Remove the fuel pump resister (A) after removing the installation bolts (B).
    Fig 1: Identifying Fuel Pump Resister & Installation Bolts
    G00540703Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals