LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Genesis Coupe 2.0T, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Transaxle Control Module (TCM) >> Repair Procedures >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Repair Procedures: Installation

  1. Installation is reverse of removal.
    CAUTION:
    1. In the case of the vehicle equipped with immobilizer or button engine start system, perform "Key Teaching" procedure together. (Refer to "BUTTON ENGINE START SYSTEM and IMMOBILIZER SYSTEM in BE group).
    2. After exchanging TCM, input the EOL (End of line).

      (Refer to "REPAIR PROCEDURES " in this group)

    3. When replacing the TCM, reset the automatic transmission values by using the GDS.
    4. Perform TCM learning after replacing the TCM.
    Fig 1: Display - Resetting Auto Transmissions Values
    G08834344Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals