LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Genesis 5.0 R-Spec >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 5.0L >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Removal >> [Bank 1/Sensor 1]
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

[Bank 1/Sensor 1]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the heated oxygen sensor connector.
  3. Lift the vehicle.
  4. Remove the heater protector (B) from the catalytic converter after removing the bolt (A).
  5. Remove the heated oxygen sensor (C) with the spanner after lifting the heater protector (B).
    Fig 1: Heated Oxygen Sensor, Heater Protector And Mounting Bolt (Bank 1/Sensor 1)
    G08822885Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals