LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Genesis 3.8 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System - 3.8L >> Inhibitor Switch >> Repair Procedures >> Inspection >> Power Circuit Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Circuit Inspection

  1. Disconnect the Inhibitor switch connector.
  2. Ignition KEY "ON" and Engine "OFF".
  3. Measure voltage between supplied power and ground at inhibitor circuit.

    Specification  : Approx. 12V

scientia non olet · About LEMON Manuals