LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Equus Ultimate >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control Module (BCM) >> Body Control Module (BCM) >> Repair procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel after loosening the mounting screws.

    (Refer to CRASH PAD LOWER PANEL .

  3. Disconnect the connector, bolt and nuts from smart key unit, BCM and tilt & telescopic unit.
    Fig 1: Identifying BCM Mounting Nut
    G09791011Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Identifying BCM Mounting Bolt
    G09791012Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the smart key (A) and BCM unit (B) after loosening bolt and nuts.
    Fig 3: Identifying Smart Key And BCM Unit
    G09791013Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals