LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Azera Base >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Body Dimensions >> Body Dimensions >> General Information >> Measurement Method >> Measurement Point
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Measurement Point

  1. Measurements should be taken at the hole center.
    Fig 1: Identifying Hole Center
    G08810492Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals