LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Accent SE, Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis (2 Of 2) >> DTC U1112: LIN Communication Error >> Component Inspection
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Component Inspection

  1. IG "OFF"
  2. Connect probe to battery sensor to check signal waveform by using oscilloscope function.
  3. IG "ON" and monitor signal waveform.

    Specification:  Signal waveform will be displayed as Signal Waveform & Data

  4. Is the measured signal waveform OK?

    YES 

    NO 

    • Substitute with a known - good battery sensor and check for proper operation.

      If the problem is corrected, replace battery sensor and go to "VERIFICATION OF VEHICLE REPAIR " procedure.