LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2013 >> Tucson GL, Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Filler-Neck Assembly >> Repair procedures >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Repair procedures: Removal

  1. Remove the rear-LH wheel, tire, and the inner wheel house.
  2. Disconnect the fuel filler hose (A) and the ventilation hose (B).
    Fig 1: Identifying Fuel Filler Hose And Ventilation Hose
    G06874355Courtesy of HYUNDAI MOTOR CO.
  3. Open the fuel filler door and unfasten the filler-neck assembly mounting screw (A).
    Fig 2: Identifying Filler-Neck Assembly Mounting Screw
    G06874356Courtesy of HYUNDAI MOTOR CO.
  4. Remove the filler-neck assembly from the vehicle after removing the bracket mounting nut (A).
    Fig 3: Identifying Bracket Mounting Nut
    G06874357Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals