LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2013 >> Santa Fe XL Luxury >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Intake Air Temperature Sensor (IATS) >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the intake air temperature sensor connector (A).
  3. Remove the installation bolts (B), and then vertically remove the sensor from the air cleaner assembly.
    Fig 1: Identifying Intake Air Temperature Sensor Connector And Mounting Bolts
    G09270752Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals