Common Specs & Procedures

GENESIS COUPE COMMON SPECS & PROCEDURES

System			Specification/Procedure
Air Conditioning
Service			SPECIFICATIONS
Torque			Torque values are in the text or in tables of the AIR CONDITIONING SYSTEM article. Also refer to TORQUE SPECIFICATIONS table under WHEN INSTALLING CONNECTING PARTS .
Axle Nut/Hub Nut
Front			65-80 ft. lbs. (88-108 N.m)
Rear			65~80 ft. lbs. (88-108 N.m)
Battery
	2.0L		Refer to BATTERY and CHARGING SYSTEM .
	3.8L		For 2012, refer to BATTERY and CHARGING SYSTEM . For 2013, refer to BATTERY and CHARGING SYSTEM .
Brakes
Bleeding Sequence			BRAKE SYSTEM BLEEDING
Disc Brakes
Service Specifications			SPECIFICATIONS
Torque			TIGHTENING TORQUES
Charging
Generator
2.0L			CHARGING SYSTEM
3.8L			For 2012, refer to CHARGING SYSTEM . For 2013, refer to CHARGING SYSTEM .
Torque
2.0L			Refer to text under ALTERNATOR .
3.8L			For 2012, refer to text under ALTERNATOR . For 2013, refer to text under ALTERNATOR .
Drive Belts
Inspection
Generator Belt - 2.0L			INSPECT DRIVE BELT
		Generator Belt - 3.8L	For 2012, refer to INSPECT DRIVE BELT . For 2013, refer to INSPECT DRIVE BELT .
Engine Cooling
General Service Specifications
		2.0L	Refer to COOLANT and ENGINE SPECIFICATIONS .
		3.8L	For 2012, refer to COOLANT and ENGINE SPECIFICATIONS . For 2013, refer to COOLANT and ENGINE SPECIFICATIONS .
Radiator Cap Pressure
		2.0L	14-19 psi
		3.8L	14-19 psi
Thermostat R & I
		2.0L	THERMOSTAT
		3.8L	For 2012, refer to THERMOSTAT . For 2013, refer to THERMOSTAT .
Water Pump R & I
		2.0L	WATER PUMP
		3.8L	For 2012, refer to WATER PUMP . For 2013, refer to WATER PUMP .
Engine Mechanical
	2.0L
Compression			COMPRESSION PRESSURE INSPECTION
Oil pressure			18.49 psi (127 kPa (1.3 kg/cm² ,) or above at 1000 RPM
Overhaul			ENGINE SPECIFICATIONS
Torque			TIGHTENING TORQUES
3.8L
Compression			COMPRESSION PRESSURE
Oil pressure			18.77 psi (130 kPa (1.32 kg/cm² ) or above at 1000 RPM
Overhaul			ENGINE SPECIFICATIONS
	Torque		TIGHTENING TORQUES
Fluid Specifications			See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button.
Flywheel/Flex Plate/Drive Plate Torque
2.0L			86.8 - 93.9 ft. lbs. (117.6 - 127.4 N.m)
3.8L			52.80 - 55.69 ft. lbs. (71.54 - 75.46 N.m)
Fuel System (2.0L)
Pressure Specification			55.0 psi (3.87 kgf/cm² , 379.5 kPa)
Fuel Pressure Test Procedure			For 2012, refer to FUEL PRESSURE TEST . For 2013, refer to FUEL PRESSURE TEST .
Fuel Filter Location			For 2012, refer to FUEL FILTER . For 2013, refer to FUEL FILTER .
Fuel Filter R & I			For 2012, refer to FUEL FILTER . For 2013, refer to FUEL FILTER .
Fuel System (3.8L)
Pressure Specification			55.0 psi (3.87 kgf/cm² , 379.5 kPa)
Fuel Pressure Test Procedure			For 2012, refer to FUEL PRESSURE TEST . For 2013, refer to FUEL PRESSURE TEST .
Fuel Filter Location			For 2012, refer to FUEL FILTER . For 2013, refer to FUEL FILTER .
Fuel Filter R & I			For 2012, refer to FUEL FILTER . For 2013, refer to FUEL FILTER .
Ignition
Firing Order & Cylinder Identification
		2.0L	1-3-4-2: Also see FIRING ORDER & CYLINDER IDENTIFICATION .
		3.8L	1-2-3-4-5-6: Also see FIRING ORDER & CYLINDER IDENTIFICATION .
	Spark Plug
	2.0L		IGNITION SYSTEM
	3.8L		For 2012, refer to IGNITION SYSTEM . For 2013, refer to IGNITION SYSTEM .
Starting (2.0L)
Starter			STARTING SYSTEM
Torque			Refer to tightening torque text under STARTER .
Starting (3.8L)
Starter			For 2012, refer to STARTING SYSTEM . For 2013, refer to STARTING SYSTEM .
Torque			For 2012, refer to tightening torque text under STARTER . For 2013, refer to tightening torque text under STARTER .
Wheel Alignment
Adjustment Specifications			WHEEL ALIGNMENT
Torque			TIGHTENING TORQUES
Wheel & Tire
Wheel Lug Nut Torque			65.1-79.6 ft. lbs. (88.3~107.9 N.m)