LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2013 >> Equus Signature >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Front Back View Camera System >> Front Back View Camera System >> Repair procedures >> Removal >> Front Back View Camera Unit
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Front Back View Camera Unit

  1. Disconnect the negative (-) battery terminal.
  2. Remove glove box housing (A). (Refer to "CRASH PAD ")
    Fig 1: Identifying Glove Box Housing
    G08831851Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the glove box housing connector (A).
    Fig 2: Identifying Glove Box Housing Connector
    G08831852Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the DIS head unit. (Refer to DIS head unit )
  5. Remove the USB interface unit.
  6. Remove the front back view camera unit (A) after removing the nuts (2EA) and connector.
    Fig 3: Identifying Front Back View Camera Unit
    G08831853Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals