Monitor Scantool Data
WARNING: This page is about a different car, the 2014 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
- Check DTC
- Check DTC with scantool.
- Check DTC related CAN communication is set on SMK unit and every modules.
- If there is DTC related Module Check the DTC according to troubleshooting guide.
- Repair and erase the DTC with Scantool.
- Is the DTC erased?
YES - Check poor connection between harness connector and SMK Unit or PCM/ECM.
Thoroughly check for looseness, poor connection, bends, corrosion, contamination, deformation or damage of connector. Repair or replace as necessary and the go to Verification of Vehicle Repair .
NO - Go to next procedure
- Check poor connection between harness connector and SMK Unit or PCM/ECM.