LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2013 >> Elantra GLS, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Front Wheel Speed Sensor >> Repair procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair procedures: Removal

  1. Remove the front wheel and tire.

    Tightening torque: 

    88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

  2. Remove the front wheel speed sensor mounting bolt (A).

    Tightening torque: 

    6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

    Fig 1: Removing Front Wheel Speed Sensor Mounting Bolt
    G10243427Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the front wheel guard.
  4. Remove the front wheel speed sensor cable mounting bolt.
  5. Disconnect the front wheel speed sensor connector (A), and then remove the front wheel speed sensor.
    Fig 2: Disconnecting Front Wheel Speed Sensor Connector
    G10243428Courtesy of HYUNDAI MOTOR AMERICA
  6. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals